SUSPENSION RATIO MEASUREMENTS

With a good pair of dial calipers you can measure the spring and fill in the information required below.

Front Suspension Measurements:
1.) Measure from the backing plate of the front brake - to - the point where the strut bolts to the lower control arm.

1.) OR from the backing plate of the front brake - to - the center line of the coil spring where it sits on the lower control arm.

---------------------- THEN ----------------------
2.) Measure from the strut bolts to the lower control arm.

2.) OR from the center line of the coil spring where it sits on the lower control arm - to where the lower control arm bolts to the chassis.

Rear Suspension Measurements:
1.) Measure from the backing plate of the rear brake - to - the point where the strut bolts to the lower control arm.

1.) OR from the backing plate of the rear brake - to - the center line of the coil spring where it sits on the lower control arm.

---------------------- THEN ----------------------
2.) Measure from where the strut bolts to the lower control arm.

2.) OR from the center line of the coil spring where it sits on the lower control arm - to - where the lower control arm bolts to the chassis.